search

UMD    AML





Credit:Maryland NanoCenter

Credit:Maryland NanoCenter

 

Wood fibers help nano-scale batteries keep their structure

A sliver of wood coated with tin could make a tiny, long-lasting, efficient and environmentally friendly battery.

But don’t try it at home yet– the components in the battery tested by scientists at the University of Maryland are a thousand times thinner than a piece of paper. Using sodium instead of lithium, as many rechargeable batteries do, makes the battery environmentally benign. Sodium doesn’t store energy as efficiently as lithium, so you won’t see this battery in your cell phone  -- instead, its low cost and common materials would make it ideal to store huge amounts of energy at once – such as solar energy at a power plant.

Existing batteries are often created on stiff bases, which are too brittle to withstand the swelling and shrinking that happens as electrons are stored in and used up from the battery. Liangbing Hu, Teng Li and their team found that wood fibers are supple enough to let their sodium-ion battery last more than 400 charging cycles, which puts it among the longest lasting nanobatteries.

WATCH: Author Hongli Zhu explains how trees inspired the research

"The inspiration behind the idea comes from the trees," said Hu, an assistant professor in the Department of Materials Science and a member of the University of Maryland Energy Research Center. "Wood fibers that make up a tree once held mineral-rich water, and so are ideal for storing liquid electrolytes, making them not only the base but an active part of the battery."

Lead author Hongli Zhu and other team members noticed that after charging and discharging the battery hundreds of times, the wood ended up wrinkled but intact. Computer models showed that the wrinkles effectively relax the stress in the battery during charging and recharging, so that the battery can survive many cycles. This work was done by Zheng Jia, a graduate student in mechanical engineering.

"Pushing sodium ions through tin anodes often weaken the tin’s connection to its base material,” said Li, an associate professor in the Department of Mechanical Engineering and a member of the Maryland Nanocenter. "But the wood fibers are soft enough to serve as a mechanical buffer, and thus can accommodate tin’s changes.  This is the key to our long-lasting sodium-ion batteries."

The team’s research was supported by the University of Maryland and the U.S. National Science Foundation.

See the full paper at:

Tin Anode for Sodium-Ion Batteries Using Natural Wood Fiber as a Mechanical Buffer and Electrolyte Reservoir

Hongli Zhu, Zheng Jia, Yuchen Chen, Nicholas J. Weadock, Jiayu Wan, Oeyvind Vaaland, Xiaogang Han, Teng Li, and Liangbing Hu

Nano Letters, 2013



Related Articles:
Building Energy Innovation in Maryland
Thin Wood Film Amplifies Speaker Technology
Wood-based Technology Creates Electricity from Heat
Wachsman and group overcome high resistance, low capacity solid-state battery barriers
New Course | ENME 808: Batteries - Operation, Modeling and Reliability
Super Wood Could Replace Steel
UMD Researchers Work to Mitigate Water Scarcity Crisis with Solar-Powered Devices Made of Wood
Wood filter removes toxic dye from water
New Nanocomposite Anodes Speed Battery Charging

June 18, 2013


«Previous Story  

 

 

"The inspiration for this battery comes from trees"

Liangbing Hu, Materials Science, UMD

Current Headlines

Search Open for Full-Time Faculty Positions in Mechanical Engineering

Maryland Engineers Take On Big Challenges in Medicine

CEEE Study Explores How AI Can Reduce HVAC Energy Consumption

Justin Di Palo: Advancing Sustainable Living

Colton Honored with Microfluidics on Glass Award

How Much Wood Could a Heat Pump Dry?

Jump Start Program Gives CEEE Grad Students a Boost

UMD to Host International Graduate Engineering Course on Sustainability

State-of-the-Art 3D Nanoprinter Now at UMD

Das Named Pioneering Researcher by Chemical Communications

 
 
Back to top  
AML Home Clark School Home UMD Home ENME Home